Selection Techniques for Pneumatic Rods

The cleaning and maintenance of pneumatic rods is the secret to extending their service life. The following points need to be done well:
1. The working pressure of the pneumatic lifting rod shall not exceed 0.30Mpa
2. The objects loaded on the top must be symmetrically arranged and firmly fixed based on the center; Avoid eccentric installation!
3. It is prohibited to hit the surface of the pneumatic lifting rod; Scrape with a sharp tool; Drilling, etc.
4. Only the top allows loading of objects; It is prohibited to hang heavy objects in other positions.
5. It is prohibited to tilt the installation and use of pneumatic lifting rods.
Pneumatic rod
6. Ensure that the electrical control module and pneumatic control module operate in a dry state.
When parts need to be replaced, parts of the same model and performance must be used.
8. Non professional technical personnel are prohibited from inspecting and repairing this equipment.
When there are abnormalities during use, only after troubleshooting can the operation be carried out (such as not being able to rise or fall normally, etc.)
10. Always ensure surface cleanliness.
First, determine the weight of the pneumatic rod based on its material. The quality of the pneumatic rod is poor, and over time, it becomes inelastic. The surface is generally smooth, but due to the thick coating on the surface, it is not easy to rust, durable, and has strong load-bearing capacity. Poor quality pneumatic rods are generally welded with thin iron sheet and have almost no rebound force.
Observe the details of the pneumatic rod. Details can indicate whether the product is good, thereby confirming whether the quality is outstanding.
Experience the feel of the pneumatic lever. Different pneumatic rods have their own advantages and disadvantages, and they have different tactile sensations when used. If the quality is good, it will feel elastic, but it will not feel stiff. Consumers can extend the pneumatic lever to experience the feel when making purchases.